Posts

Here are the 4 signs you should replace your water heater

A water heater is a convenience most homeowners don’t fully appreciate until it stops working. If you aren’t a fan of freezing cold showers or baths (and who is, especially when it’s cold here in Chicagoland), pay attention to these signs you need water heater replacement from the pros here at King Heating, Cooling & Plumbing.

King is the premier choice for plumbing services here in Oak Forest, Joliet, and Orland Park. To schedule water heater services, contact us today!

Pictured: It might be time for water heater replacement from the pros here at King Heating, Cooling & Plumbing.The 4 signs you need a new water heater

If you notice any of these signs, it’s time to have an experienced plumber from King out to your home to inspect your water heater.

1. Your water looks muddy or sandy

If the water coming out of the tap looks muddy or sandy, you could have a buildup of sediment in your water heater tank. You may be able to rectify the problem by simply draining the contents of the tank and clearing out the sediment. However, if muddy water continues to be a problem, it may be time for a new water heater.

2. Your water heater doesn’t produce hot water anymore

When the heating element in a water heater burns out, it will no longer put out hot water. If your water heater is still fairly new, you may be able to get the heating element repaired. If it’s old, it may make more financial sense to just replace the entire unit. Your King plumber will advise you on the best course of action.

3. You have no idea when your water heater was last replaced

If you have been in your home for longer than 10 to 15 years and you have no idea when your water heater was last replaced, it’s time for a new one. Most water heaters last a maximum of 15 years, so if yours is older, it’s probably very close to the end of its operational life.

4. You frequently have to schedule repairs

One of the most common water heater replacement signs is the need for frequent repairs. If your water heater breaks down all the time, you’ll be better off replacing it. Not only will you save money in the long run by purchasing a new unit, but you’ll also have greater peace of mind that you’ll actually have access to hot water when you need it.

Call King for water heater replacement here in Chicagoland

If you’ve noticed any of the above signs, it’s time to consider installing a new water heater. King Heating, Cooling & Plumbing has skilled water heater replacement pros on our team, and we’re ready to help. Our plumbers have experience repairing and replacing all water heater makes and models.

To schedule your appointment, call us today!

Here are some signs you need a new water heater

Your water heater is necessary for accomplishing everyday tasks around your home, such as washing the dishes and taking a shower. However, your water heater will start to break down over time. You don’t need to wait until a catastrophe occurs to get a new water heater. Here are the common warning signs you need a new water heater.

Suspect that it’s time to switch out your water heater? Contact your local plumbing experts at King Heating, Cooling & Plumbing. We offer 24/7 emergency service here in Chicagoland!

Here are the 5 signs you need a new water heater

#1. The water is rusty

If you see rust when you turn on the hot water, this is one of the clearest signs you need a new water heater. Rust and corrosion usually happen when the anode rod is spent and the walls of the tank are exposed to water and heat for years. If your water heater is deteriorating, it will start to rust and eventually start leaking.

Pictured: One of the signs you need a new water heater is that your anode rod is spent. In this image, you can see a new anode rod versus a completely corroded one.

Pictured: One of the signs you need a new water heater is that your anode rod is spent. In this image, you can see a new anode rod versus a completely corroded one.

#2. The unit is old

Try to find out when your water heater was made. You can usually figure this out by finding the serial number and looking it up online. If your water heater is at least 10 years old, you should consider replacing it. At the very least, you should call King for an inspection to make sure your water heater is still safely working.

#3. Your water heater is making strange sounds

Your water heater should be relatively quiet. However, it may start rumbling as it ages. As your water heater gets older, sediment will accumulate at the bottom of the tank. As the sediment gets constantly heated, it hardens and causes banging or rumbling sounds.

These noises indicate that there is a layer of hard sediment that is causing damage to your water heater and making it less efficient.

#4. It’s leaking

If you see any moisture near your water heater, it’s time to call the professionals at King Heating, Cooling & Plumbing. As metal heats up, it expands and it may cause the water tank to develop a small fracture. If the leaking gets worse, it may cause flooding or water damage.

#5. You don’t get enough hot water

Nothing’s worse than feeling a burst of cold water in the middle of a warm, comfortable shower. If this is happening to you on a regular basis, you probably need to replace your water heater.

Noticing the signs you need a new water heater? Contact King immediately!

If you notice any of these things are happening to your water heater, you should get it looked at immediately. Contact us today to learn how we can help.

Make the switch to a demand-type water heater!

Hot water is one of those things that you don’t truly appreciate until you no longer have it. From showering and washing your dishes to doing your laundry, there’s a lot you need hot water for. That’s just one of the many reasons you should consider making the switch to a demand-type water heater.

Demand-type, or tankless water heaters, have many benefits compared to standard water heaters. In this blog, we’ll break down some of the key differences.

Pictured: A demand-type water heater can provide your home with unlimited hot water out of your kitchen faucets.Save money by saving energy

One of the main reasons to switch out your current water heater for a demand-type system is to save money on the cost of heating your water. Among the benefits of these systems is that water is only heated when you turn on the faucet, rather than needing it to be heated and then stored in a tank.

Because of their efficiency, you’ll also be doing your part to save the environment when you install a tankless water heater. It’s easier than ever to go green, and your home’s appliances are a great place to start.

Get more years out of your system

No matter how much you’d like to save on heating, cooling, and plumbing, there’s no denying the fact that home appliances can be expensive. Another great thing about tankless water heaters is that they’ve been known to last for up to 20 years when well-taken care of.

Better water, better safety

When water is heated and left in a storage tank, there’s a chance it can collect rust and scale, which you don’t want coming out of your showerhead or kitchen faucet when you’re ready to cook. You can sidestep that issue with a tankless heater.

You also don’t have to worry as much about accidentally scalding yourself with burning hot water with a water heater that doesn’t use a tank. That’s because such water heaters have unique safety features that keep that from happening.

Call us to learn if a demand-type water heater is right for your home

Interested in learning more about demand-type water heaters? If so, don’t hesitate to contact us at King Heating, Cooling & Plumbing today. See for yourself how much space, money, and time you can save with an upgraded appliance.

Is it a good idea to soften your home’s hard water?

Hard water damage is a nuisance. It can leave your skin feeling itchy and dry. Also, it leaves nasty-looking stains in your sinks and toilets. This H2O contains a high concentration of minerals, such as magnesium and calcium. As a result, mineral build-up can occur over time and wreak havoc on your heating system and pipes.

At a glance: what are hot water problems?

Hard water typically affects faucets, tubs, sinks and appliances. Because of this, it can impact several areas of your life. One of the main issues is that it prevents soaps and detergents from lathering. This hinders your personal bathing experience. Also, your clothes and other fabrics don’t get as clean as they can.

Are your energy bills higher than usual? If so, scaled deposits from your hard water may be the culprit. This is a mineral build-up, which is also known as scaling.

When a household unit, such as your water heater, develops these deposits it must work harder. It uses up more energy and becomes less efficient. As a result, it takes a bite out of your pockets.

Call King Heating, Cooling & Plumbing for hard water solutions

Hard water can put a damper on your daily tasks. It hampers personal care, makes it difficult to thoroughly clean clothes, leaves behind stains and drives up energy costs.

This isn’t something you have to live with or accept. Let our plumbing experts handle this situation for you. Our team here at King is available 24/7 and we don’t charge extra for coming out on evenings and weekends. Schedule a service visit by contacting us today.