Posts

AC breakdown signs: 4 reasons to call King for service

Sometimes, an AC breakdown comes out of nowhere. That’s why King offers 24/7 AC repair services—often, the need for repair takes you and your home by surprise. But, there are other times when there are AC breakdown signs before the breakdown happens. In this blog post, we’ll review some of these signs and when you need to call King.

Need our 24/7 AC repair services? Call us at (708) 687-6898 or contact us online.

First: How you can avoid an AC breakdown

Pictured: Having seen AC breakdown signs, this homeowner called in an AC technician to fix her floor unit.We all know how excruciating summer can become as the mercury goes up and up and the humidity takes over. You need your AC unit firing on all cylinders. We recommend having King inspect and tune up your AC unit before the start of the season.

With that in mind, here are some signs of an impending AC breakdown:

#1. There’s refrigerant leakage

If you notice that your air conditioning unit is taking more time to cool off your living space than usual, then there might be a leakage of refrigerant. Simply filling up your air conditioning system with new refrigerant won’t solve the problem until you get the leakage repaired. In other words, it is necessary to call King to come take look at the problem ASAP.

#2. Your air conditioner isn’t responding to the thermostat

The cooling capabilities of your air conditioning unit can also be affected by an out-of-position sensor. This problem usually occurs in ductless air conditioners, but can also impact standard air conditioners. When the sensor comes in contact with the evaporator coil inside the AC unit, it can affect the performance of your air conditioning unit.

Only a professional AC repair technician—like the certified techs at King—should be trusted to make this repair to your air conditioner.

#3. At times, warm air is coming from the air conditioner

In the summers, warm air coming from your air conditioning unit indicates that there might be some serious fault within the system. Sudden drop in the levels of refrigerant or compressor failure are the most likely reason for this phenomenon.

#4. There’s no air flow and your system struggles

Another problem is when you sense you’re your unit is not giving out any air or very less air. This can happen either due to a problem with the blower or clogged ducts.

Blowers run on electricity and there also might be an issue with the electrical connections within the system. Never attempt to fix electrical wires or connections yourself! Doing so can be very dangerous. Call King instead.

Encountering AC breakdown signs? Call King!

If you are encountering any of the aforementioned mentioned problems with your air conditioning unit, don’t delay—call King for AC repair services. AC breakdown signs are your chance to deal with AC issues before they become a catastrophe and major headache. You can reach us at (708) 687-6898 or contact us online.

Here’s how to reduce electric bills without sacrificing your comfort

Running your air conditioner 24/7 during the summers can cause a significant surge in your electric bills. However, most people are not comfortable with the alternate. Fortunately, there are a number of ways you can reduce electric bills without sacrificing your comfort.

reduce electric bills

Here we have listed some effective tips that will help you to slash your air conditioner bills without having to sweat during the sweltering summer days.

1. Keep the blinds closed during the day

Keeping the blinds closed is a simple way to reduce electric bills. The sunlight that enters the room warms up the temperature inside. As a result, your air conditioner will have to work extra hard to cool the room.

Simply closing the blinds during the day will prevent these rays of sunlight from heating your room.

2. Keep the air conditioner temperature at 72  (22 ℃) or higher

The ideal air conditioner temperature at home to save electricity bills without sacrificing comfort is 72 ℉ (22 ℃). Keep in mind that every degree you raise will result in savings of about three to five percent on your electricity bills.

Setting the temperature at a higher setting may feel a bit uncomfortable, but you will be able to reap monetary benefits.

3. Reduce electric bills by installing a programmable thermostat

Another important tip to reduce your cooling bill is to install a programmable thermostat. These thermostats feature a built-in timer. You can program the thermostat to set a higher temperature when you are normally out during the day and a lower setting when you’re at home during the evening.

This will help you maximize your cost savings. Also consider installing a WiFi thermostat, as such a device will allow you to set the temperature in your home, no matter where you are. You’ll never have to worry about forgetting to adjust the temperature when you are outside.

4. Avoid placing the thermostat near hot objects

You should not place the air conditioner thermostat near sources of heat. Don’t place it near lamps or in direct sunlight. The thermostat can sense the heat, resulting in abnormal functioning.

The air conditioner will run for long periods, even after the desired temperature is reached. This will unnecessarily result in increased energy bills.

5. Schedule an AC tune-up with the team at King Heating & Cooling

A regular air conditioner tune-up from King Heating, Cooling & Plumbing will keep your AC unit in working condition. With a tune-up from our professional technicians, your AC will run efficiently without using too much energy.

Our expert technicians will carry out a thorough inspection of the air conditioner and perform need repairs. In this way, your air conditioner will run without any strain resulting in reduced energy bills.

Call King for your AC tune-up and tips on how to reduce electric bills in your home

Contact us to schedule an AC tune-up, or for your other air conditioning needs. Our professional and certified technicians can identify and resolve all kinds of air conditioning issues.

4 Valuable Tips For Avoiding Furnace Failure This Winter

Avoid Furnace FailureThe furnace is an essential device that keeps the house warm and comfortable during frigid winter months. A properly working furnace ensures that you do not spend the cold season shivering miserably. In order to ensure that the heating device continues to operate without any problem during the winters, it’s important that you have the system regularly checked by a professional technician to avoid furnace failure.

No one likes the prospect of their furnace breaking down in the middle of the cold season. To avoid this, you should keep in mind certain points that can decrease the chances of an emergency furnace failure.

1. Keep the filters clean

The importance of having the filters cleaned cannot be emphasized enough. The filter is the lungs of the furnace. If it becomes clogged with dirt or dust, it will not be able to heat the room properly. What’s more, it can also lead to increased strain as the furnace will struggle to produce warm air, and ultimately break down.

A clogged filter prevents proper airflow and forces the air handler to strain. This results in an overheating problem that eventually results in a system failure. In addition, the clogged filter allows some dirt and dust to enter the system. The dust can coat the furnace motor and the blower that can also quicken the furnace breakdown. Keeping the furnace serviced regularly will ensure that you don’t face the problem.

2. Inspect the thermostat battery

Occasionally the furnace fails to perform due to a simple thermostat battery problem. Some thermostats require a battery to operate. The batteries typically last for 3 to 4 years after which they require replacement. That’s why it’s a good idea to keep spare batteries so that you can replace them easily when required.

3. Keep the air vents open

Another advice to prevent furnace failure is to keep the air vents open. Closed vents are certainly not a good idea in the unused rooms as it can lead to furnace failure. Instead of saving energy, it can actually make the furnace strain to produce the heat that leads to energy problems later on.

4. Consider a furnace maintenance contract

You should strongly consider signing a maintenance contract with an experienced furnace repair company. This is the most effective advice to avoid the prospect of a furnace failure. The expert technician will thoroughly check the system during the routine inspection.

If anything is wrong with the furnace, the technician will perform the repair then and there that prevents major fault to occur with the system.

Call King for furnace maintenance to avoid furnace failure

Regular furnace maintenance will ensure that you don’t face the problem of an emergency furnace failure. If you require expert furnace service in Elgin, Illinois and the surrounding areas northwest of Chicago, you can contact King Heating Cooling and Plumbing. We have a team of experienced and NATE-certified furnace technician that can perform all kinds of furnace repair and replacement tasks.